OSW RF2 Setup

mx1703

Hi

I have just built an OSW Sim wheel setup using the IONI driver and Mige 130st 10010 Motor
I need an RFactor2 controller.json/MMO's setup that works!! has anybody had any success?
every setup I try pulls you into corners it's as if that parameter needs reversing
 
Look for this line in your controller.json:

"Steering effects strength":-10000

Default is at 10000, if you want to revert FFB, add a minus sign (-) like above.
 
Prodigy said:
Look for this line in your controller.json:

"Steering effects strength":-10000

Default is at 10000, if you want to revert FFB, add a minus sign (-) like above.
Click to expand...

Thanks that fixed that problem:)

All I have to figure out now is how to remove the small hump around the wheel centre point, It is there for about 4 deg where the wheel drops of centre then its fine

If I had to visualise it it would look something like this (I only had paint handy)


View attachment 19937
 
I would start of by deleting the controller file then restart rFactor to create a new one, that way your starting of fresh, I've never had anything like what you're describing with my IONI OSW so something definitely not right.
 
cookie said:
I would start of by deleting the controller file then restart rFactor to create a new one, that way your starting of fresh, I've never had anything like what you're describing with my IONI OSW so something definitely not right.
Click to expand...

Is it possible to start a new topic with the means of keeping track of all settings for IONI based OSW projects?
I think many would benefit to have some form of a documented, tested, point to start from :)
 
Last edited:
Thanks

I did what you suggested its the same, do you have your JSON file so I could take a look, I'm using the SimuCUBE Prototype it may be something to do with that
 
Probably is SimuCUBE mode I tried all the new settings with the updated IONI firmware and couldn't find anything I liked so I reverted back to my old settings. SimuCUBE mode definitely changed the feel around the center I think it's iRacing based like most things in the OSW world
 
How do you have the encoder set in Granity and MMOs ?

Don't know how that happened cant delete the post :confused:
 
mx1703 said:
Same as my setup, I have tried all the settings I can think of but the centering problem still remains
Click to expand...
I hope my simucube arrives soon so i can discus and test also mx 1703 [emoji6]

3376aeb442dac43fb5144cab8a5e4780.jpg


8fa2a8789e12bfe7144799cc97359a3a.jpg
 
mx1703 said:
Same as my setup, I have tried all the settings I can think of but the centering problem still remains
Click to expand...

Can you use the window snipping tool and give us a look at your setting in Mmos and Granity, it's a shame you can't get it working right because the OSW is superb in rFactor 2 even better than my AccuForce wheel, anyway here's mine for the flat6 mod and FFB smoothing 3 inside rFactor.
'



View attachment 19947View attachment 19948View attachment 19949View attachment 19950View attachment 19951View attachment 19952

View attachment 19961
 
Last edited:
What are you driving with a steering lock of 180? go-kart,you can go as high as 3300Hz Torque bandwidth limit, anyway glad you got it sorted.
 
You must log in or register to reply here.

Back
Top